FlexFilter 13 and 18 cartrige dust collector

FlexFilter 13 and 18 cartrige dust collector (formerly MHFV)

The FlexFilter 13/18 models (formerly MHFV) are high vacuum filters used in applications with a working vacuum of max. 30.000 Pa.(4.35psi)

The filters are made in galvanised steel sheet and is bolted together, which makes it a very competitive alternative to other high vacuum filters.

The FlexFilter 13 and 18 can be used in applications where there is a high content of dry dust particles.

The filter can be supplied with either cartridges (UniClean) or cassettes depending on the air flow, the dust type and the dust concentration. The MHFV filter can be delivered in two different heights – type 1300 and 1800.

The cartridges/cassettes are cleaned automatically by a high-efficiency, low energy consuming compressed air system activated by an integral electronic controller.

The FlexFilter 13 and 18 are also available in an ATEX approved version for St1, St2 or St3 dust Ex-vents, size 410x410 mm (16x16 in), are supported on the back side to allow vacuum max 0,4 bar (5.80 psi).

• Easy to maintain
• Quick release waste bin
• Inspection and change of the filter elements can take place within a few minutes
• Front service of the cleaning valves, the controller, the compressed air tank and the filter elements
• Available with cartridges or cassettes

No products have been assigned to this category.