Cyclone Dust Collectors

Cyclone Dust Collectors

Cyclone dust collectors can be used as pre-separators to reduce the dust load reaching the final filter, or as protective devices to remove large hot particles from the gas or air stream to prevent damage to the filter material. High efficiency cyclones require more energy and therefore have higher running costs. Lower efficiency cyclones are often more effective when used together with a final filter or dust collector, as they allow a better mix of particle sizes to reach the filter material, which can help to extend the useful working life of the filter material.

Browse these categories under "Cyclone Dust Collectors"

Cyclone 200

Cyclone 200For use on silos, tanks, containers etc. suitable to store the collected materialHigh efficiency cyclone pre-separator used when large amounts of pre-separation of collected material from the transportation airflow is required.These cyclones are normally located on silos, tanks, containers etc. suitable to store the collected material and thereby function as a dead chamber under the cyclone.

MCA Multi cyclone

MCA Multi cycloneSuitable for flue gas particle separationThe MCA is a range of seven multi-cylone separators designed particularly for high temperature applications. Gas flows up to 63.000 m3/h (37,000 CFM) are possible with up to 60 modules.

NC cyclone

NC cycloneBasic cyclone to separate large materials from the airflowThe cyclone is a separator that uses centrifugal force to purify air loaded with chips or dust. Its performance depends on the rotation speed, density and grading of particles. Cyclones are available with a wide range of accessories.Efficiency approx. 90% for particles above 10 micron.Higher efficiency for large particles.Built in 2 and 3 mm (.08 in and .1 in)-thick steel sheet depending on the size.Max temperature 75ºC (167ºF) with standard paint